6S Shaking Table

6S Shaking Table

Equipment Introduction

6S Shaking table is one kind of main equipment of gravity concentration, which is be widely used in minerals separation of tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ores.

It is applied in different separations of rough concentration, elaborate concentration and scavenging concentration, which can process coarse sand (2-0.5mm), fine sand (0.5-0.074mm) and ore slurry(-0.074). It also can be used in processing iron, manganese ore and coal. The effective recycling granularity range of shaking table is 2-0.22 millimeters during processing tungsten, tin ores.

Main Composition Of 6S Shaking Table

6S shaking table is a primary gravity separation equipment,which is manly consists of eight parts: table head, electric motor, slope control, deck, feed box, water tank, rifle spokes and lubrication system.

Working principle of 6S Shaking Table

The working principle of this machine is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.

Main Benefits And Features

  1. Keep table surface operate balanced even though changing cross fall and stroke.
  2. Characterized by high rich ore ratio, high separating efficiency
  3. Easiness to take charge and convenient adjustment.
  4. The springs with compact structure are placed in the table.
  5. Recovery rate of valuable mineral with medium-fine particle-size increased.

Technical Data

6S Shaking Table
Model and Specification 6-S/LY 6-S/LY 6-S/LY LY
Table Size(mm) Length×Feed width×Concentrate width 4520×1850×1560 3000×1620×1100 2100×1050×850 1100×500×430
Selective are(㎡) 7.67 4.08 2 0.51
Feed size(mm) coarse sand 1-2.5 0.6-1.5 0.4-0.8 0.1-0.2
fine sand 0.8-1.2 0.3-0.8 0.2-0.5 0.05-0.1
slurry 0.3-0.6 0.2-0.4 0.1-0.2 0.03-0.05
Water consumption(t/h) 0.5~3.5 0.3~1.5 0.2~1 0.1~0.5
Stroke(mm) 8~36 10~30 12~28 9~17
Jig frequency(q/m) 240~380 240~420 250~450 280~460
Cross fall(°) 0°~5° 0°~8° 0°~10° 0°~10°
Motor Model Y70L-4 Y100L-4 Y90L-4 Y80L-4
Power(kw) 1.1 1.1 1.1 0.55
Revolving speed(r/min) 1400 1400 1400 1400
V-belt(mm) A-2000 A-1033 B-2007 A-1245
Overall Dimension(Length*Width*Height)mm 5630×1850×900 4075×1320×780 3040×1050×1020 1530×500×800
Weight(kg) 650 550 350 150
Notes: The above technical parameters based on stationary type shaking table, are for your reference only.